Archivarium 2004 Repository of our 2003/2004 Topics |
|
| View previous topic :: View next topic |
| Author |
Message |
Destany Regulars

Joined: 24 Aug 2004 Location: Missouri
|
Posted: 2005.04.08(Fri)10:52 Post subject: what type of filtration? |
|
|
I'm putting in a 100g pond, hole's dug, liner's set, it's still dry, I'm wondering what kind of filtration/pump I should get. Low cost is a big thing - hubby only indulges my little projects if I keep them low budget...
I was wondering if there's any way to create a filtration system using a small basic pump - I was looking at the HW store yesterday and found some utility pumps that put out 2-4 thousand gallons/hour! lol, the old dude didn't seem to understand exactly what the pump should do, he actually reccommended setting up a siphoning tube to move the water...
Anyway, have any of you created a diy filtration system using a small pump? If so, what type did you use, and how many g/h would I need for such a thing?
The pond will house some gouramis in the summer, which I'll bring inside come winter. |
|
| Back to top |
|
 |
dale Regulars
Joined: 10 Jan 2005 Location: Vancouver Canada
|
Posted: 2005.04.09(Sat)21:08 Post subject: |
|
|
Hi Destany,
For a 100 gal. pond you can use a very simple sponge filter. Sometimes one comes with the pump or you can just role a flat sponge around the intake and secure with elastics. With this setup you just have to clean it out on a regular basis by wringing it in a bucket of the pond water.
You can build a more elaborate filter by pumping the water into a container (like a bucket with a drainage lip.) from the pond. Lead the pump tube from the pond into the bottom of the container and fill the container with filter media (sponge, bio balls etc...) The water will percolate up through the media and spill back into the pond. How it blends in and the size is up to you.
Note* Really check how the spill stream goes into the pond. Water is notorious for running along edges and under lips and spilling onto the ground. One way to avoid accidentally draining the pond is to not place the pump intake near the bottom of the pond. If it is half way up it will leave half the water in
Good luck! _________________ Think like a fish |
|
| Back to top |
|
 |
anonapersona Advisors
Joined: 06 Feb 2003 Location: Houston, Texas
|
Posted: 2005.04.09(Sat)21:28 Post subject: |
|
|
http://www.drsfostersmith.com/product/prod_display.cfm?pcatid=10805&N=62728+113359
I have something like this in a 300 gallon pond. Mine cost $45 and has a slightly larger flow I think. It has a sponge nsert that acts as the filter, and a flow control valve to control the fountain head. I have mine with the sprayer head removed so there is a gurgling fountain in the pond but no spray that could accelerate evaporation. |
|
| Back to top |
|
 |
mark 45 Regulars
Joined: 12 May 2004 Location: Venice FL
|
Posted: 2005.04.13(Wed)14:13 Post subject: |
|
|
Try this site http://www.pondliner.com/ they have all kinds of pond filters and pumps. They are great to deal with and will answer any questions you may have about pond filtration.
Mark |
|
| Back to top |
|
 |
|
|
|
| |
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2008 phpBB Group
|
|